Connecting External Devices

All cables that are supplied with each new Oudie are designed to work directly with Flarm. The main cable that you...

Oudie 2 and Oudie IGC is delivered with a variety of cables and converters which enable you to connect Oudie...

There are three basic ways to connect Oudie to the GPS source: You can choose which option you would like...

When you try to connect an external device to Oudie with a serial cable and it doesn’t work out of...

The recommended way to connect to the brilliant LXNAV Nano flight recorder is by Bluetooth: No cables, no problems.

Pinout for Oudie serial cable with RJ45 connector: 1 & 2 = +12V 3 & 4 = no function 5...

Our UK agent Dickie Feakes is greatly knowledgeable about the old Cambridge instruments. He put together the following tutorial about...

LX DB9/MALE pin1 – GND pin3 – RX (Receive to Oudie) pin4 – TX (Transmit from Oudie) pin5 – GND...

CAI DB9/MALE pin1 – GND pin2 – RX (Receive to Oudie) pin3 – TX (Transmit from Oudie) pin5 – GND...

Oudie 2 has got a small hardware revision in September 2019. As a consequence a USB pinout has changed: 1 =...